�Create Your Own Solution

 Download the product information
CL-100, Fiberoptic 100Mbps Ethernet Transceiver
CL-100T1, Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + RS232
CL-155, Fiberoptic 155 Mbps Multimode to Singlemode Converter
CL-200, Fiberoptic 10/100Mbps Ethernet Transceiver
CL-200MN, Two-port Fiberoptic Managed 10/100 to 100BASE-FX Converter
CL-1250, Fiberoptic Gigabit Ethernet Tranceiver
CL-2500, CWDM System Chassis
CL-5000, CWDM System Chassis
CL-RS232, RS-232 to Fiber Converter
CL-T1/E1, IP over TDM Gateway
CL-T1/ET, E1/T1 over IP Gateway for LAN Telecom Application
CL-5000FE, Card Module for System Chassis CL-2005 and CL-5000
CL-5000GE, Card Module for System Chassis CL-2005 and CL-5000
�Model�� CL-1250C�
CL-1250C, Fiberoptic Gigabit Ethernet Tranceiver
The CL-1250C is a Gigabit Ethernet transceiver that repeats optical signals between two fiberoptic ports. The CL-1250C can convert signals between RJ-45 Gigabit Ethernet connections and singlemode fiber optic. CL-1250C can be configured to transmit over one or two fiber strands. The CL-1250C expands network data transmission distances beyond 100m limitation of twisted pairto maximum 110km by transmitting over singlemode fiberoptic cable in ful duplex mode. The CL-1250C has easy-to-read diagnostic LED's for continuous status report on network speed, duplex media access control connection and network traffic. The CL-1250C uses standard SC or SC/APC fiberoptic connectors and is IEEE 802.3z 1000BASE-FX compliant and operates with all devices that adhere to this standard.


- 1000 Mbps Full Duplex Gigabit Ethernet Transceiver
- 1 x 1000BASE-FX LAN Fiber Port (multimode or singlemode optics)
- 1 x 1000BASE-FX WAN Fiber Port (singlemode optics 1310, 1550, CWDM, DWDM)
- 110km Transmission Range
- 1 or 2 Fiber Strand Transmission
- Full wire-rate 2000 Mbps Duplex Transmission for greater network performance
- Plug-n-Play Gigabit Ethernet Mode Converter or Singlemode Repeater
- IEEE 802.3z compliant
- Guaranteed Switch performance and hardware compatibility with other switches, hubs and adapters

Example Aplication

Model Selection

MPEG-2 Digital Video Decoder, RJ-45, Bit rate: 25.6Mbps, Interface: ATM
1000BASE Fiberoptic Gigabit Ethernet Transceiver/Receiver, 2 Port, 1 Fiber, SC/APC Connector, 80km
1000BASE Fiberoptic Gigabit Ethernet Transceiver/Receiver, 2 Port, 1 Fiber, SC/APC Connector, 110km


IEEE 802.3z 1000BASE-FX Gigabit Ethernet (CL-1250, CL-1250C)
IEEE 802.3ab 1000BASE-T (CL-1250C)
Connection Ports
2 Fiber Port Transceiver: SC/PC or SC/APC
480mm x 225mm x 44mm
Operating temperature: 0°C to 50°C
Storage temperature: -20°C to 70°C
Operating humidity: 10% to 90% RH
Storage humidity: 5% to 90% RH
Input Power Requirements
Voltage: 110/240V Auto-sense Internal Power
Regulatory Compliance
FCC Part 15 Class A, CE, UL, CUL, TUV
Network Media
62.5/125 microns muitimode fiber cable
9/125 micron singlemode fiber cable
Led Indicators
Gig E: Power, Link

Go back to home page Previous page Back to top
Company : News : Solutions : Technology : Support : Clients : Contact Us