Search
  �Create Your Own Solution

 Download the product information
 
 
 
CL-100, Fiberoptic 100Mbps Ethernet Transceiver
2.    CL-100T1, Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + RS232
3.    CL-155, Fiberoptic 155 Mbps Multimode to Singlemode Converter
4.    CL-200, Fiberoptic 10/100Mbps Ethernet Transceiver
5.    CL-200MN, Two-port Fiberoptic Managed 10/100 to 100BASE-FX Converter
6.    CL-1250, Fiberoptic Gigabit Ethernet Tranceiver
7.    CL-1250C, Fiberoptic Gigabit Ethernet Tranceiver
8.    CL-2500, CWDM System Chassis
9.    CL-5000, CWDM System Chassis
10.    CL-RS232, RS-232 to Fiber Converter
11.    CL-T1/E1, IP over TDM Gateway
12.    CL-T1/ET, E1/T1 over IP Gateway for LAN Telecom Application
13.    CL-5000FE, Card Module for System Chassis CL-2005 and CL-5000
14.    CL-5000GE, Card Module for System Chassis CL-2005 and CL-5000
�Model�� CL-100�
CL-100, Fiberoptic 100Mbps Ethernet Transceiver

Ethernet Network Over Fiber Optic Media Converter

The CL-100 is a Fast Ethernet media converter that translates transmission signals from a twisted-pair 100BASE-TX cable to 10OBASE-FX fiberoptic cable. The CL-100 can be configured to transmit over one ortwo fiber strands.
The CL-100 expands network data transmission distances beyond the 100m limitation of copper wire to a maximum of 110km by using fiberoptic cable in full duplex mode. The CL-100 provides auto-sensing detection of full duplex or half duplex signaling. It has easy-to-read diagnostic LED's for continuous status reports on network speed, duplex media access control connection, and network traffic. The CL-100 uses standard RJ-45 UTP/STP and SC or SC/APC fiberoptic connectors and is IEEE 802.3u 100BASE-TX/FX compliant and operates with all devices that adhere to this standard.

For Sales Inquiries please contact us today: Contact Us!



Features


- 100Mbps Full Duplex
- 1x 100BASE-T Port
- 1x 100BASE-FX Fiber Port
- 110km Transmission Range
- 1 or 2 Fiber Strand Transmission
- Provide full wire-rate 200 Mbps Duplex Transmission for greater network performance
- Plug-n-Play Ethernet & Fast Ethernet Switch
- IEEE 802.3u compliant
- Guaranteed Switch performance and hardware compatibility with other switches, hubs and adapters


Example Aplication





Model Selection


CL-100-1S-SCA-40
100Base Fiberoptic Ethernet Transceiver, 2 Port, 1 Fiber, SC/APC Connector, 40 Km
CL-100-1S-SCA-80
100Base Fiberoptic Ethernet Transceiver, 2 Port, 1 Fiber, SC/APC Connector, 80 Km
CL-100-2S-SCA-60
100Base Fiberoptic Ethernet Transceiver, 2 Port, 2 Fiber, SC/APC Connector, 60 Km
CL-100-2S-SCA-110
100Base Fiberoptic Ethernet Transceiver, 2 Port, 2 Fiber, SC/APC Connector,
CL-100-1M-SC-2
110 Km 100Base Fiberoptic Ethernet Transceiver, 2 Port, 1 Fiber, SC/PC Connector, 2 Km


Specifications


Standards
IEEE 802.3u 100BASE-TX/FX Fast Ethernet
Connection Ports
1 UTP port & 1 Fiber port
1 x RJ-45 100 Mbps UTP port and 1 x 100Base-FX Fiber port
Dimensions
260mm x 145mm x 44mm
Environment
Operating temperature: 0°C to 40°C
Storage temperature: -20°C to 70°C
Operating humidity: 10% to 90% RH
Storage humidity: 5% to 90% RH
Input Power Requirements
Voltage: 110/240V Auto-sense Internal Power
Regulatory Compliance
FCC Part 15 Class A, CE, UL, CUL, TUV
Network Media
100BASE-T: UTP category 5
100BASE-T: SC 62.5/125 microns multimode fiber cable
Crossover Push Button
1 crossover button for the UTP port

 
 
Go back to home page Previous page Back to top
Search
Company : News : Solutions : Technology : Support : Clients : Contact Us