Search
  �Create Your Own Solution

 Download the product information
 
 
 
CL-100, Fiberoptic 100Mbps Ethernet Transceiver
CL-155, Fiberoptic 155 Mbps Multimode to Singlemode Converter
CL-200, Fiberoptic 10/100Mbps Ethernet Transceiver
CL-200MN, Two-port Fiberoptic Managed 10/100 to 100BASE-FX Converter
CL-1250, Fiberoptic Gigabit Ethernet Tranceiver
CL-1250C, Fiberoptic Gigabit Ethernet Tranceiver
CL-2500, CWDM System Chassis
CL-5000, CWDM System Chassis
CL-RS232, RS-232 to Fiber Converter
CL-T1/E1, IP over TDM Gateway
CL-T1/ET, E1/T1 over IP Gateway for LAN Telecom Application
CL-5000FE, Card Module for System Chassis CL-2005 and CL-5000
CL-5000GE, Card Module for System Chassis CL-2005 and CL-5000
�Model�� CL-100T1�
CL-100T1, Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + RS232

4 E1/T1 + RS232 + 10/100 Ethernet over Fiber Optic Multiplexer

CL-100T1, a Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + RS232 interfaces, provides multiple broadband transmission capacities over one fiberoptic strand for point-to-point connectivity. With short/long haul optical transceivers, CL-100T1 may provides short/long reach up to 11 Okm distance. The Ethernet interface is 100 Mbps auto negotiation and can be full/half duplex. The E1 is transparent and in full rate, which can support the E1 framed and unframed mode, including fractional E1. The RS232 interface is set at the rate of 115.2 Kbps, none parity, 8 data bit, 1 stop bit. A pair of CL-100T1 offers a cost effective solution for Fiber to the Building (FTTB) applications to meet various corporate/enterprise demands such as MTU/MDU. The CL-100T1 is indeed an ideal FTTB broadband solution for LAN-to-LAN connectivity, InternetAccess, Serial RS232and multiple E1 Broadband Voice/data/video applications.

For Sales Inquiries please contact us today: Contact Us!



Features


Optical signal interface
Optical source: 1310nm/155M Multimode SC Module
1310nm/155M Single mode SC Module
Optical wavelength range: 1310/1550 +/- 50nm
Optical connector: SC type
Desktop and 19" rack (option)


Example Aplication





Model Selection


CL-100T1
Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + RS232, 1 Fiber, 40km
CL-100T1/80
Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + RS232, 1 Fiber, 80km
CL-100T1/110
Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + Rs232, 1 Fiber, 110km


Specifications


E1 Interfaces
Line Interface: ITU-T G.703
Line Rate: 2.048 Mbps +/- 50ppm
Line Code: HDB3 Frame Format: Unframed
Line Impedance: 120 ohm
Connectors: RJ-48C
T1 Interfaces
Line Interface: ANSI T1.403, ITU-T G.703
Line Rate: 1.544 Mbps +/- 50ppm Line Code: B8ZS
Frame Format: Unframed
Line Impedance: 100 ohm
Connectors: RJ-48C
Ethernet Interfaces
High performance bridge for Ethernet extension
100BASE-T Ethernet interface
Fully compatible with IEEE802.3, 802.3u
Line Rate: up to 115200 bps
Connects: RJ-45 to RS232 DB9 cable
Dimensions
260mm x 151 mm x 44mm
Operating Environment
Humidity: 5% to 95% non - condensing
Temperature: 0°C to +50°C
Regulatory Compliance
CE, FCC Rules Part 15 Class A
Status LED
POWER: power is ON
LAN: Ethernet LAN port is in connection
FIBER: Fiber port is in connection
RS232: RS232 serial port is in connection
E1/T1: Each corresponding E1/T1 port is in connection
LOS: Each corresponding E1/T1 port is in loss of synchronization

 
 
Go back to home page Previous page Back to top
Search
Company : News : Solutions : Technology : Support : Clients : Contact Us