1.	CL-4000, 1 or 4 HDSDI / HDMI to QAM inserter DVB-T /DVB-C or IP
2.	CL-3000, HD-SDI or SD-SDI to QAM inserter
3.	CL-2000, HD Component Video or VGA Video to QAM Inserter
4.	CL-12, 1 Video 2 or 4 or 8 Audio over fiber for up to 150Km Broadcast
5.	CL-12HD, 1 Video 2 Audio 1 ASI or 1 HD/SD -SDI to fiber
6.	CL-12SC, 1 Video 2 Audio 1 subcarrier (4.5Mhz) Audio over fiber
	CL-24, 2 channels Fiber Optic Video and 4 simplex audio Transmitter and Receiver
8.	CL-48, 4 Channel Video 8 Audio Fiber Optic Transmitter / Receiver up to 120Km
9.	CL-816, CL-816, 8 Baseband Video/16 Audio Fiberoptic Video Multiplexer
10.	CL-1632, 16 Baseband Video/32 Audio Fiberoptic Video Multiplexer
11.	CL-1250V, Fiberoptic Gigabit Ethernet Video/Audio Multiplexer
12.	CL-1250VHD, Gigabit Ethernet , Video/Audio ASI - SDI , HDTV fiber optic Multiplexer
13.	CL-10V, 10 Channel Video Fiberoptic Multiplexer
14.	CL-270, 1-16 DVB ASI video or SDI video Fiberoptic Transport
15.	CL-350, MPEG Transport Stream Converter
16.	CL-350S, MPEG Transport Stream Fiberoptic Converter
17.	CL-110, MPEG-2 Digital Video Decoder
18.	CL-220, MPEG-2 Digital Video Encoder
19.	CL- ASI2IP, bi-directional ASI over IP converter , IP over ASI converter
20.	CL-LBAND, L-Band 900-2100Mhz RF Transmitter/Receiver
21.	CL-5000VA, Video/Audio Card Module
22.	CL-5000DVB, DVB-ASI/SMTPE 310M Card Module
23.	CL-FOS, Automatic and Manual optical redundant failover switch 1×2, 2×1 or 2×2
24.	CL-DVI2IP, DVI or VGA over IP High Definition Encoder and Decoder
25.	CL-HDMI2IP, HDMI to IP High definition Encoder
26.	CL-HDMI-RF, HDMI true 1080p High definition wireless transmission
27.	CL-HD-ENC, HD Video / Audio - MPEG4 h.264 Encoder
28.	CL-12ASI2I, 12ASI to IP converter
29.	CL-12IP2AS, IP to up to 12 ASI converter
30.	CL-ASI2IP, ASI to IP and IP to ASI converter
31.	CL-870-T, 1310 or 1550nm Direct Modulated AGC Optical Transmitter
32.	CL-870-R-2, Optical CATV RF Reciever with Dual Internal Redundancy
33.	CL-RF-SW, 2×1 RF switch, with its high resolution to the RF monitor
34.	CL-ASIMUX, 8 x 1 DVB ASI Transport Stream Multiplexer
35.	CL-MPEG224, MPEG-2 to MPEG-4 Transcoder
36.	CL-MPEG422, MPEG-4 to MPEG-2 Transcoder
37.	CL-4100, HD/SD - SDI to ASI Real time Encoder Converter
38.	CL-4SD-ENC, (4 in 1) 4 channel Baseband Video/Audio MPEG-2 encoder with DVB ASI and IP output.
39.	CL-ASI2DS3, ASI over DS3 line Transport Uni-directional, Bi-derectional
40.	CL-HDSDI, Uncompressed HD-SDI, SD-SDI, ASI Video Audio Over Fiber
41.	CL-ASI-DA, 2, 4, 8, 16 ASI , SDI ,SMPTE310M Distribution Amplifier
42.	CL-HD-DEC, HD Video / Audio - MPEG4 h.264 Decoder
43.	CL-SD-ENC, IP and ASI TS Encoder with SD-SDI and Baseband Video / Audio input
44.	CL-ASI2E1, ASI to 4 E1 converter and 4 E1 to DVB-ASI
45.	CL2000S, VGA RGB Video to QAM Inserter with Built in Resolution Scaler

ï¿½Modelï¿½ï¿½

CL-24ï¿½

	CL-24, 2 channels Fiber Optic Video and 4 simplex audio Transmitter and Receiver

Rack-mountable CL-24 fibre optic baseband video multiplexer

The CL-24 is ideal for transmitting 2 channels of base band video and up to 4 channels of audio on one fibre optic cable.
The CL-24 operates by digitizing and multiplexing base band video and audio into a fibre optic cable. Because the system employs 12-bit digital transmission techniques, performance characteristics are consistent and are maintained over the specified distance with no degradation of signal.
There are no FM carriers that need to be tuned or that can drift over time. The low component count and use of custom ASICs increase system reliability and performance. The CL-24 is designed to work with standard single mode or multimode fibre optic cable and can be wall mounted or rack mounted. Both transmitter and receiver come equipped with internal power supplies.

Built-in diagnostics LEDs for each channel are LINK status facilitates continuous monitoring of equipment status.

For Sales Inquiries please contact us today: Contact Us!

Support Point-to-Point or Daisy-Chain connection
Uncompressed Digital Composite Video and Audio over one fibre
Compatible with all PAL, NTSC,SECAM Video Systems
Multimode Fibre Support for Distances up to 5 km
Single-Mode fibre Support for Distances up to 220 km
LED Status Provide Rapid Indication of Operating Parameters
No EMI or RFI and no ground loops
Support Coarse Wavelength Division Multiplexing (CWDM)and DWDM
Stand alone or rack-mount

Features

- High Quality 10-bit Digital Sampling of Video Inputs
- Uncompressed Digital Transmission
- 2 Channel Baseband Video Transmission
- Optional 2 or 4 Channel Audio Transmission
- Audio Compatible with Balanced or Unbalanced Audio Formats
- Transmit up to 110km over one strand of fiberoptic cable
- High Quality Uncompressed Digital Transmission
- 67dBSNR
- 6.5 MHz Bandwidth per Video Channel
- Bidirectional Transmission available

Example Aplication