�Create Your Own Solution

 Download the product information
CL-4000, 1 or 4 HDSDI / HDMI to QAM inserter DVB-T /DVB-C or IP
CL-3000, HD-SDI or SD-SDI to QAM inserter
CL-2000, HD Component Video or VGA Video to QAM Inserter
CL-12, 1 Video 2 or 4 or 8 Audio over fiber for up to 150Km Broadcast
CL-12HD, 1 Video 2 Audio 1 ASI or 1 HD/SD -SDI to fiber
CL-12SC, 1 Video 2 Audio 1 subcarrier (4.5Mhz) Audio over fiber
CL-24, 2 channels Fiber Optic Video and 4 simplex audio Transmitter and Receiver
CL-48, 4 Channel Video 8 Audio Fiber Optic Transmitter / Receiver up to 120Km
CL-1632, 16 Baseband Video/32 Audio Fiberoptic Video Multiplexer
CL-1250V, Fiberoptic Gigabit Ethernet Video/Audio Multiplexer
CL-1250VHD, Gigabit Ethernet , Video/Audio ASI - SDI , HDTV fiber optic Multiplexer
CL-10V, 10 Channel Video Fiberoptic Multiplexer
CL-270, 1-16 DVB ASI video or SDI video Fiberoptic Transport
CL-350, MPEG Transport Stream Converter
CL-350S, MPEG Transport Stream Fiberoptic Converter
CL-110, MPEG-2 Digital Video Decoder
CL-220, MPEG-2 Digital Video Encoder
CL- ASI2IP, bi-directional ASI over IP converter , IP over ASI converter
CL-LBAND, L-Band 900-2100Mhz RF Transmitter/Receiver
CL-5000VA, Video/Audio Card Module
CL-5000DVB, DVB-ASI/SMTPE 310M Card Module
CL-FOS, Automatic and Manual optical redundant failover switch 12, 21 or 22
CL-DVI2IP, DVI or VGA over IP High Definition Encoder and Decoder
CL-HDMI2IP, HDMI to IP High definition Encoder
CL-HDMI-RF, HDMI true 1080p High definition wireless transmission
CL-HD-ENC, HD Video / Audio - MPEG4 h.264 Encoder
CL-12ASI2I, 12ASI to IP converter
CL-12IP2AS, IP to up to 12 ASI converter
CL-ASI2IP, ASI to IP and IP to ASI converter
CL-870-T, 1310 or 1550nm Direct Modulated AGC Optical Transmitter
CL-870-R-2, Optical CATV RF Reciever with Dual Internal Redundancy
CL-RF-SW, 21 RF switch, with its high resolution to the RF monitor
CL-ASIMUX, 8 x 1 DVB ASI Transport Stream Multiplexer
CL-MPEG224, MPEG-2 to MPEG-4 Transcoder
CL-MPEG422, MPEG-4 to MPEG-2 Transcoder
CL-4100, HD/SD - SDI to ASI Real time Encoder Converter
CL-4SD-ENC, (4 in 1) 4 channel Baseband Video/Audio MPEG-2 encoder with DVB ASI and IP output.
CL-ASI2DS3, ASI over DS3 line Transport Uni-directional, Bi-derectional
CL-HDSDI, Uncompressed HD-SDI, SD-SDI, ASI Video Audio Over Fiber
CL-ASI-DA, 2, 4, 8, 16 ASI , SDI ,SMPTE310M Distribution Amplifier
CL-HD-DEC, HD Video / Audio - MPEG4 h.264 Decoder
CL-SD-ENC, IP and ASI TS Encoder with SD-SDI and Baseband Video / Audio input
CL-ASI2E1, ASI to 4 E1 converter and 4 E1 to DVB-ASI
CL2000S, VGA RGB Video to QAM Inserter with Built in Resolution Scaler
�Model�� CL-816�
CL-816, CL-816, 8 Baseband Video/16 Audio Fiberoptic Video Multiplexer

Rack-mountable CL-816 fibre optic base band video multiplexer

The CL-816 is ideal for operating and for transmitting up to 8 channels of base band video and 16 channels of audio on fibre optic cable. The CL-816 operates by digitizing and multiplexing 8 channels of standard analogue video and 16 channels of standard audio into a high-speed serial cable using 10-bit sampling technology. Because the system employs true digital transmission techniques, performance characteristics are consistent and maintained over the specified distance with absolutely no degradation of signal.
There are no FM carriers that need to be tuned or that can drift over time. The low component count and use of custom ASICs increase system reliability and performance. The CL-816 is designed to work with standard single mode or multimode fibre optic cable and can be wall mounted or rack mounted. Built-in diagnostics LEDs for each channel; loss of video signal and optical link indicator facilitate rapid setup and the continuous monitoring of all phases of operation. The operation can be monitored remotely via optional remote monitoring capabilities. SNMP can be supported as well.

For Sales Inquiries please contact us today: Contact Us!


- 8 Channel Baseband Video and 16 Channel Audio Transmission
- High Quality 10-bit Digital Video Sampling
- Transmit up to 110km over on strand of fiberoptic cable
- High Quality Uncompressed Digital Transmission
- 67 dB SNR
- Optional Remote Monitoring capability
- SNMP monitoring capability optional
- Bidirectional transmission available

Example Aplication

Model Selection

Fiberoptic Baseband Video Mux, 8 Video/16 Audio, Singlemode, 1 Fiber, SC/APC Connector, 40km
Fiberoptic Baseband Video Mux, 8 Video/16 Audio, Singlemode, 1 Fiber, SC/APC Connector, 80km
Fiberoptic Baseband Video Mux, 8 Video/16 Audio, Singlemode, 1 Fiber, SC/APC Connector, 110km
Fiberoptic Baseband 16 Audio Transmitter, Singlemode, 1 Fiber, SC/APC Connector 40 / 80 /110km
Fiberoptic Baseband 16 Audio Receiver , Singlemode, 1 Fiber, SC/APC Connector 40 /80 / 110km


8 Baseband Video/16 Audio
Video Bandwidth
10 Hz to 6.5 MHz
67 dB
<1 deg/<1%
Video Input
1V p-p, 75 ohm
480mm x 225mm x 44mm
Operating temperature: 0°C to 50°C
Storage temperature: -20°C to 70°C
Operating humidity: 10% to 90% RH
Storage humidity: 5% to 90% RH
Input Power Requirements
Voltage: 110/240V Auto-sense Internal Power
FCC Part 15 Class A, CE, UL, CUL, TUV

Go back to home page Previous page Back to top
Company : News : Solutions : Technology : Support : Clients : Contact Us