�Create Your Own Solution
CL-4000, 1 or 4 HDSDI / HDMI to QAM inserter DVB-T /DVB-C or IP
CL-3000, HD-SDI or SD-SDI to QAM inserter
CL-2000, HD Component Video or VGA Video to QAM Inserter
CL-12, 1 Video 2 or 4 or 8 Audio over fiber for up to 150Km Broadcast
CL-12HD, 1 Video 2 Audio 1 ASI or 1 HD/SD -SDI to fiber
CL-12SC, 1 Video 2 Audio 1 subcarrier (4.5Mhz) Audio over fiber
CL-24, 2 channels Fiber Optic Video and 4 simplex audio Transmitter and Receiver
CL-48, 4 Channel Video 8 Audio Fiber Optic Transmitter / Receiver up to 120Km
CL-816, CL-816, 8 Baseband Video/16 Audio Fiberoptic Video Multiplexer
CL-1632, 16 Baseband Video/32 Audio Fiberoptic Video Multiplexer
CL-1250V, Fiberoptic Gigabit Ethernet Video/Audio Multiplexer
CL-1250VHD, Gigabit Ethernet , Video/Audio ASI - SDI , HDTV fiber optic Multiplexer
CL-10V, 10 Channel Video Fiberoptic Multiplexer
CL-270, 1-16 DVB ASI video or SDI video Fiberoptic Transport
CL-350, MPEG Transport Stream Converter
CL-350S, MPEG Transport Stream Fiberoptic Converter
CL-110, MPEG-2 Digital Video Decoder
CL-220, MPEG-2 Digital Video Encoder
CL- ASI2IP, bi-directional ASI over IP converter , IP over ASI converter
CL-LBAND, L-Band 900-2100Mhz RF Transmitter/Receiver
CL-5000VA, Video/Audio Card Module
CL-5000DVB, DVB-ASI/SMTPE 310M Card Module
CL-FOS, Automatic and Manual optical redundant failover switch 1×2, 2×1 or 2×2
CL-DVI2IP, DVI or VGA over IP High Definition Encoder and Decoder
CL-HDMI2IP, HDMI to IP High definition Encoder
CL-HDMI-RF, HDMI true 1080p High definition wireless transmission
CL-HD-ENC, HD Video / Audio - MPEG4 h.264 Encoder
CL-12ASI2I, 12ASI to IP converter
CL-12IP2AS, IP to up to 12 ASI converter
CL-870-T, 1310 or 1550nm Direct Modulated AGC Optical Transmitter
CL-870-R-2, Optical CATV RF Reciever with Dual Internal Redundancy
CL-RF-SW, 2×1 RF switch, with its high resolution to the RF monitor
CL-ASIMUX, 8 x 1 DVB ASI Transport Stream Multiplexer
CL-MPEG224, MPEG-2 to MPEG-4 Transcoder
CL-MPEG422, MPEG-4 to MPEG-2 Transcoder
CL-4100, HD/SD - SDI to ASI Real time Encoder Converter
CL-4SD-ENC, (4 in 1) 4 channel Baseband Video/Audio MPEG-2 encoder with DVB ASI and IP output.
CL-ASI2DS3, ASI over DS3 line Transport Uni-directional, Bi-derectional
CL-HDSDI, Uncompressed HD-SDI, SD-SDI, ASI Video Audio Over Fiber
CL-ASI-DA, 2, 4, 8, 16 ASI , SDI ,SMPTE310M Distribution Amplifier
CL-HD-DEC, HD Video / Audio - MPEG4 h.264 Decoder
CL-SD-ENC, IP and ASI TS Encoder with SD-SDI and Baseband Video / Audio input
CL-ASI2E1, ASI to 4 E1 converter and 4 E1 to DVB-ASI
CL2000S, VGA RGB Video to QAM Inserter with Built in Resolution Scaler
�Model�� CL-ASI2IP�
CL-ASI2IP, ASI to IP and IP to ASI converter

Digital Video Broadcast ASI to IP Stream Ethernet Gateway

CL-ASI2IP and CL-IP2ASIis  compact ASI-to-IP gateway that makes it fast, easy, and affordable to transport DVB-ASI video from remote sites - such as small TV studios, security hot spots, traffic observation points, or weather stations - to central locations.

CL-ASI2Ip convertes ASI to IP

CL-IP2ASI convertes IP back to ASI .

They could be used in pairs, but can also work with the existing MPEG2 Encoder and Decoder.

Today, setting up video transport links to remote sites is costly and time-consuming. The low latency, high bandwidth channels needed to carry ASI streams of MPEG-encoded SD or HD video dictate the use of either a satellite link, an optical service on a fibre backbone, or a point-to-point microwave radio link.

Comlan simplifies and cost reduces links to remote sites by allowing the video to stream reliably over economical IP networks. One side CL-ASI2IP plugs into coax from an MPEG-to-ASI encoder, the other to an Ethernet cable.

At the central location - such as a production house, play-out centre, satellite earth station or surveillance/security office - the video can be converted back to ASI by a CL-IP2ASI .

For remote sites, where basic Ethernet services aren't available, the ASI IP  can be used in conjunction with a low-cost wireless IP transmission system. An inexpensive way to set up point-to-point IP connections between two sites.

The ASI IP and IP ASI exceptional jitter control, lossless data transfer, and advanced error correction standards ensure pristine image quality. Multicast transmission is fully supported, enabling the same video stream to be distributed simultaneously to multiple destinations.

For Sales Inquiries please contact us today: Contact Us!

Main Features: 
Powerful embedded CPU is used for the hardware, enabling stable and reliable performance;
Open Linux or RTOS is used for the software;
Complete Ethernet protocol, providing 100M/1000M BaseT network interface;
UDP connection mode, specially designed for video data application;
USB interface;
Communication protocol and remote control software package for development (optional);
Compact design, easy to mount;
Output/Input status indicators, easy to operate.



Example Aplication

Model Selection

ASI to IP converter (Encoder) (TX)
IP to ASI converter (EDecoder) (RX)


Technical Specifications:

Ethernet Interface : 10/100M, duplex/semi-duplex self-adaptive
ASI Output Interface : BNC, 75Ω
ASI Max Output Bit Rate : 26Mbps
Serial Interface : Male DB-9
Equipment Setting : Via Webserver or RS232
Power Supply : 5VDC
Power Consumption : < 15 W
Dimension/Weight : 220mm*140mm*38mm / 0.5KG
Temperature : 0°C to 40°C
Humidity : 10-90%, non-condensing

Go back to home page Previous page Back to top
Company : News : Solutions : Technology : Support : Clients : Contact Us