Search
  �Create Your Own Solution
 
 
 
CL-4000, 1 or 4 HDSDI / HDMI to QAM inserter DVB-T /DVB-C or IP
CL-3000, HD-SDI or SD-SDI to QAM inserter
CL-2000, HD Component Video or VGA Video to QAM Inserter
CL-12, 1 Video 2 or 4 or 8 Audio over fiber for up to 150Km Broadcast
CL-12HD, 1 Video 2 Audio 1 ASI or 1 HD/SD -SDI to fiber
CL-12SC, 1 Video 2 Audio 1 subcarrier (4.5Mhz) Audio over fiber
CL-24, 2 channels Fiber Optic Video and 4 simplex audio Transmitter and Receiver
CL-48, 4 Channel Video 8 Audio Fiber Optic Transmitter / Receiver up to 120Km
CL-816, CL-816, 8 Baseband Video/16 Audio Fiberoptic Video Multiplexer
CL-1632, 16 Baseband Video/32 Audio Fiberoptic Video Multiplexer
CL-1250V, Fiberoptic Gigabit Ethernet Video/Audio Multiplexer
CL-1250VHD, Gigabit Ethernet , Video/Audio ASI - SDI , HDTV fiber optic Multiplexer
CL-10V, 10 Channel Video Fiberoptic Multiplexer
CL-270, 1-16 DVB ASI video or SDI video Fiberoptic Transport
CL-350, MPEG Transport Stream Converter
CL-350S, MPEG Transport Stream Fiberoptic Converter
CL-110, MPEG-2 Digital Video Decoder
CL-220, MPEG-2 Digital Video Encoder
CL- ASI2IP, bi-directional ASI over IP converter , IP over ASI converter
CL-LBAND, L-Band 900-2100Mhz RF Transmitter/Receiver
CL-5000VA, Video/Audio Card Module
CL-5000DVB, DVB-ASI/SMTPE 310M Card Module
CL-FOS, Automatic and Manual optical redundant failover switch 12, 21 or 22
CL-DVI2IP, DVI or VGA over IP High Definition Encoder and Decoder
CL-HDMI2IP, HDMI to IP High definition Encoder
CL-HDMI-RF, HDMI true 1080p High definition wireless transmission
CL-HD-ENC, HD Video / Audio - MPEG4 h.264 Encoder
CL-12ASI2I, 12ASI to IP converter
CL-12IP2AS, IP to up to 12 ASI converter
CL-ASI2IP, ASI to IP and IP to ASI converter
CL-870-T, 1310 or 1550nm Direct Modulated AGC Optical Transmitter
CL-870-R-2, Optical CATV RF Reciever with Dual Internal Redundancy
CL-ASIMUX, 8 x 1 DVB ASI Transport Stream Multiplexer
CL-MPEG224, MPEG-2 to MPEG-4 Transcoder
CL-MPEG422, MPEG-4 to MPEG-2 Transcoder
CL-4100, HD/SD - SDI to ASI Real time Encoder Converter
CL-4SD-ENC, (4 in 1) 4 channel Baseband Video/Audio MPEG-2 encoder with DVB ASI and IP output.
CL-ASI2DS3, ASI over DS3 line Transport Uni-directional, Bi-derectional
CL-HDSDI, Uncompressed HD-SDI, SD-SDI, ASI Video Audio Over Fiber
CL-ASI-DA, 2, 4, 8, 16 ASI , SDI ,SMPTE310M Distribution Amplifier
CL-HD-DEC, HD Video / Audio - MPEG4 h.264 Decoder
CL-SD-ENC, IP and ASI TS Encoder with SD-SDI and Baseband Video / Audio input
CL-ASI2E1, ASI to 4 E1 converter and 4 E1 to DVB-ASI
CL2000S, VGA RGB Video to QAM Inserter with Built in Resolution Scaler
�Model�� CL-RF-SW�
CL-RF-SW, 21 RF switch, with its high resolution to the RF monitor

RF Redundancy Switch for Fail Over Protection

An RF switch is used for signal distribution redundancy or for remote RF switching. Our RF Switch has two inputs and a single output. One of the inputs acts as the primary channel while the second is used for fallover protection. When the switch detects that the incoming RF to the primary channel has dropped below a set reference level the unit will immediately switch to the backup channel. The unit can also be switched manually by either its front control panel or remotely via SNMP or RS-232. Our unit features full remote management for setting system parameters an system monitoring.

For Sales Inquiries please contact us today: Contact Us!



Features


Product feature

- High speed and high resolution of RF monitor
- Standard RS232 communication interface
- Integrate SNMP network management function.
- The switch mode is automatic or manual.
- Switch reference level can be set through front panel or Internet.


Example Aplication





Model Selection


CL-RF-SW2x1
21 RF switch, with its high resolution to the RF monitor,


Specifications


Aplications
- Main application
- CATV RF switching, redundancy backups.
- RF control system.
- Laboratory.
Standards
Operating bandwidth(MHz) 5~1000
Input level range (dBμV) 50~130
Control level range (dBμV) 60~120
Resolving capability (dB) ≤0.5
Switch mode AGC & MGC
Switch time (ms) ≤10
Insertion loss(dB) 0.5
Flatness (dB) ≤0.5
Return loss(dB) ≥16
Impedance (Ω) 75
RF connector F-female
Serial interface RS232
SNMP Network management interface RJ45
Power supply (V) 95~250VAC , Optional -48VDC(30~60VDC)
Power consume (W) ; 10
Operating temp. (C) 5~65
Storage temp. (C) -40~85
Relative humidity (%) 5~95
Size (")1910.51.75(W)(D)(H)

 
 
Go back to home page Previous page Back to top
Search
Company : News : Solutions : Technology : Support : Clients : Contact Us