�Create Your Own Solution
CL-4000, 1 or 4 HDSDI / HDMI to QAM inserter DVB-T /DVB-C or IP
CL-3000, HD-SDI or SD-SDI to QAM inserter
CL-2000, HD Component Video or VGA Video to QAM Inserter
CL-12, 1 Video 2 or 4 or 8 Audio over fiber for up to 150Km Broadcast
CL-12HD, 1 Video 2 Audio 1 ASI or 1 HD/SD -SDI to fiber
CL-12SC, 1 Video 2 Audio 1 subcarrier (4.5Mhz) Audio over fiber
CL-24, 2 channels Fiber Optic Video and 4 simplex audio Transmitter and Receiver
CL-48, 4 Channel Video 8 Audio Fiber Optic Transmitter / Receiver up to 120Km
CL-816, CL-816, 8 Baseband Video/16 Audio Fiberoptic Video Multiplexer
CL-1632, 16 Baseband Video/32 Audio Fiberoptic Video Multiplexer
CL-1250V, Fiberoptic Gigabit Ethernet Video/Audio Multiplexer
CL-1250VHD, Gigabit Ethernet , Video/Audio ASI - SDI , HDTV fiber optic Multiplexer
CL-10V, 10 Channel Video Fiberoptic Multiplexer
CL-270, 1-16 DVB ASI video or SDI video Fiberoptic Transport
CL-350, MPEG Transport Stream Converter
CL-350S, MPEG Transport Stream Fiberoptic Converter
CL-110, MPEG-2 Digital Video Decoder
CL-220, MPEG-2 Digital Video Encoder
CL- ASI2IP, bi-directional ASI over IP converter , IP over ASI converter
CL-LBAND, L-Band 900-2100Mhz RF Transmitter/Receiver
CL-5000VA, Video/Audio Card Module
CL-5000DVB, DVB-ASI/SMTPE 310M Card Module
CL-FOS, Automatic and Manual optical redundant failover switch 1×2, 2×1 or 2×2
CL-DVI2IP, DVI or VGA over IP High Definition Encoder and Decoder
CL-HDMI2IP, HDMI to IP High definition Encoder
CL-HDMI-RF, HDMI true 1080p High definition wireless transmission
CL-HD-ENC, HD Video / Audio - MPEG4 h.264 Encoder
CL-12ASI2I, 12ASI to IP converter
CL-12IP2AS, IP to up to 12 ASI converter
CL-ASI2IP, ASI to IP and IP to ASI converter
CL-870-T, 1310 or 1550nm Direct Modulated AGC Optical Transmitter
CL-870-R-2, Optical CATV RF Reciever with Dual Internal Redundancy
CL-RF-SW, 2×1 RF switch, with its high resolution to the RF monitor
CL-MPEG224, MPEG-2 to MPEG-4 Transcoder
CL-MPEG422, MPEG-4 to MPEG-2 Transcoder
CL-4100, HD/SD - SDI to ASI Real time Encoder Converter
CL-4SD-ENC, (4 in 1) 4 channel Baseband Video/Audio MPEG-2 encoder with DVB ASI and IP output.
CL-ASI2DS3, ASI over DS3 line Transport Uni-directional, Bi-derectional
CL-HDSDI, Uncompressed HD-SDI, SD-SDI, ASI Video Audio Over Fiber
CL-ASI-DA, 2, 4, 8, 16 ASI , SDI ,SMPTE310M Distribution Amplifier
CL-HD-DEC, HD Video / Audio - MPEG4 h.264 Decoder
CL-SD-ENC, IP and ASI TS Encoder with SD-SDI and Baseband Video / Audio input
CL-ASI2E1, ASI to 4 E1 converter and 4 E1 to DVB-ASI
CL2000S, VGA RGB Video to QAM Inserter with Built in Resolution Scaler
�Model�� CL-ASIMUX�
CL-ASIMUX, 8 x 1 DVB ASI Transport Stream Multiplexer
The CL-ASIMUX-8 is a digital TV multiplexer for MPEG over ASI transport streams. The unit accepts up to 8 DVB-ASI inputs that are either single program or multi program. The CL-ASIMUX-8 then compresses and encodes all inputs into a single multi-channel transport stream output. The output supports EPG (Electronic Program Guide), CA (Conditional Access), and data broadcasting. The inputs support serial ASI at a bit rate of up to 270Mbps. Four output signals are supplied for added versitility. SI (Service Information) data can be inserted via a provided input channel to the output transport streams for achieving real time generation of EPG data. The CL-ASIMUX-8 can run completely independently of external control software and is fully configurable via the front panel user interface. This unit is perfect for multiplexing or re-multiplexing all MPEG ASI transport streams and for insertion and generation of EPG data.


Compliance with ISO13818 and EN300 468 standards;
Support IP data injection
Support PSI editing
Support PCR correction and PID re-mapping
8M bytes caches, anti-burst stream
Support PSI editing functions
Each channel can choose 128 PID
Can insert data, reuse and transmission a variety of data
Alarm function
Support cascading between multiple devices
Enables centralized network management, support network remote upgrade feature
LCD display, easy and flexible to operate
High reliability design, stable operation
1U Rack
MPEG-SI Tables insertion
PCR Re-stamping;

Example Aplication

Model Selection

8 x 1 DVB ASI Transport Stream Multiplexer
4 x 1 DVB ASI Transport Stream Multiplexer


Input : ASI - 8 channel(highest at 270Mbps/channel)
IP injection - RJ45 10/100M Base-T TX
Output : ASI -up to 4 channels
Data input : packet format - Automatic identification,188/204
byte packets
Bandwidth : 150mbps
PID range- 0000-1FFF
PID VPN - Can add an arbitrary PID VPN and mapping
Max PID - 128
Packet format - 188/204 automatic detection

Re-multiplexing : MPEG-2 transport stream re-multiplexing
PID Re-mapping (auto or manual)
PCR Correction
automatically generate PSI / SI tables
Management : RJ-45 10/100M Base-T TX
Front Panel LCD contoll
up to 8 ASI (BNC) inputs
up to 4 ASI (BNC) output
1 Ethernet (RJ45) managment port
44mm * 482mm * 410mm
Power Requirements
110- 220V AC10%,50Hz,25W
Network Media
Network Managment
P1: TS multiplexer-select program
P2: TS multiplexer-output setting
P3: TS multiplexer-NIT table
P4: TS multiplexer-edit PSI table
P5: TS multiplexer-PID Pass-through
P6: TS multiplexer-PID filter
P7: TS multiplexer-monitor
Control Keys And Status Indicator
6 buttons front panel contoll

Go back to home page Previous page Back to top
Company : News : Solutions : Technology : Support : Clients : Contact Us