�Create Your Own Solution
CL-4000, 1 or 4 HDSDI / HDMI to QAM inserter DVB-T /DVB-C or IP
CL-3000, HD-SDI or SD-SDI to QAM inserter
CL-2000, HD Component Video or VGA Video to QAM Inserter
CL-12, 1 Video 2 or 4 or 8 Audio over fiber for up to 150Km Broadcast
CL-12HD, 1 Video 2 Audio 1 ASI or 1 HD/SD -SDI to fiber
CL-12SC, 1 Video 2 Audio 1 subcarrier (4.5Mhz) Audio over fiber
CL-24, 2 channels Fiber Optic Video and 4 simplex audio Transmitter and Receiver
CL-48, 4 Channel Video 8 Audio Fiber Optic Transmitter / Receiver up to 120Km
CL-816, CL-816, 8 Baseband Video/16 Audio Fiberoptic Video Multiplexer
CL-1632, 16 Baseband Video/32 Audio Fiberoptic Video Multiplexer
CL-1250V, Fiberoptic Gigabit Ethernet Video/Audio Multiplexer
CL-1250VHD, Gigabit Ethernet , Video/Audio ASI - SDI , HDTV fiber optic Multiplexer
CL-10V, 10 Channel Video Fiberoptic Multiplexer
CL-270, 1-16 DVB ASI video or SDI video Fiberoptic Transport
CL-350, MPEG Transport Stream Converter
CL-350S, MPEG Transport Stream Fiberoptic Converter
CL-110, MPEG-2 Digital Video Decoder
CL-220, MPEG-2 Digital Video Encoder
CL- ASI2IP, bi-directional ASI over IP converter , IP over ASI converter
CL-LBAND, L-Band 900-2100Mhz RF Transmitter/Receiver
CL-5000VA, Video/Audio Card Module
CL-5000DVB, DVB-ASI/SMTPE 310M Card Module
CL-FOS, Automatic and Manual optical redundant failover switch 12, 21 or 22
CL-DVI2IP, DVI or VGA over IP High Definition Encoder and Decoder
CL-HDMI2IP, HDMI to IP High definition Encoder
CL-HDMI-RF, HDMI true 1080p High definition wireless transmission
CL-HD-ENC, HD Video / Audio - MPEG4 h.264 Encoder
CL-12ASI2I, 12ASI to IP converter
CL-12IP2AS, IP to up to 12 ASI converter
CL-ASI2IP, ASI to IP and IP to ASI converter
CL-870-T, 1310 or 1550nm Direct Modulated AGC Optical Transmitter
CL-870-R-2, Optical CATV RF Reciever with Dual Internal Redundancy
CL-RF-SW, 21 RF switch, with its high resolution to the RF monitor
CL-ASIMUX, 8 x 1 DVB ASI Transport Stream Multiplexer
CL-MPEG224, MPEG-2 to MPEG-4 Transcoder
CL-MPEG422, MPEG-4 to MPEG-2 Transcoder
CL-4100, HD/SD - SDI to ASI Real time Encoder Converter
CL-4SD-ENC, (4 in 1) 4 channel Baseband Video/Audio MPEG-2 encoder with DVB ASI and IP output.
CL-ASI2DS3, ASI over DS3 line Transport Uni-directional, Bi-derectional
CL-ASI-DA, 2, 4, 8, 16 ASI , SDI ,SMPTE310M Distribution Amplifier
CL-HD-DEC, HD Video / Audio - MPEG4 h.264 Decoder
CL-SD-ENC, IP and ASI TS Encoder with SD-SDI and Baseband Video / Audio input
CL-ASI2E1, ASI to 4 E1 converter and 4 E1 to DVB-ASI
CL2000S, VGA RGB Video to QAM Inserter with Built in Resolution Scaler
�Model�� CL-HDSDI�
CL-HDSDI, Uncompressed HD-SDI, SD-SDI, ASI Video Audio Over Fiber
HD-SDI Fiber Optic Extender enables long and short haul transmission over single mode fibre of multi-rate HD/SD SDI video, with embedded audio and metadata. Made for high resolution image performance, it uses all digital technology to transmit multi-rate HS/SD SDI signals up to 1.5 Gbps. Using CWDM multiplexing technology we can transport up to 16 separate signals from different sources from place A to B point-to-point or A to many receivers at the same time ,point to multipoint applications. Bi-directional optical transmission is also available.
Using our universal CWDM multiplexing platform CL2500 and CL5000 we are able to mix any different signals like Ethernet, RS 232, CATV RF, L-band, Baseband Video / Audio, QAM on the same fibre. To optimize SDI signal transmission all input signals are equalized and output signals are relocked. It could be used in many different applications: Transport form Tv’s studios to cable companies head ends, digital signal, broadcast and production, rental and staging, and medical applications - Government, military, police, schools, satellite companies, and medical environments
It designed for long distance transmission of high resolution content with zero loss in signal quality. Because transmission of content is inherently secure and immune to outside interference, fiber optic transport applications are very reliable. Standard SC, ST, FC,LC-type connectors are used. CL-HDSDI-MM supports multimode fiber at 850 nm, which is typically used within buildings or facilities with transmission distances up to 1000 m (3280 feet). The CL-HD-SDI-T and RX supports singlemode 1310 nm 1550nm or CWDM ,DWDM ITU frequencies. Singlemode fiber offers long-range transmission capability over extreme distances of up to 120 km (75 miles). It is used in very large facilities such as airports and stadiums, and for connecting over very long distances between facilities such as university campuses.
It is protocol independent, recognizes and transmits SDI, HD-SDI, ASIs, and is compliant with SMPTE 259M, 292M, 424M, and ITU digital video standards. CL-HDSDI-TR transceiver, multi-rate SDI signals can be simultaneously transmitted and received between the units.


Supports the HD-SDI -SMPTE 292M at 1.485 Gbps standard.
-Supports the SD-SDI - SMPTE 259M at 270Mbps standard.
-Supports the SMPTE 310M at 19.4Mbps, M2S
-Supports the SMPTE 344M at 540Mbps
-Supports DVB-ASI at 270Mbps,
-Supports SMPTE 344M at 540Mbps and
-Supports SMPTE305M at SDTi rates.
-Supports embedded audio and data. Audio and data must be embedded externally.
-Loop-through Input; Equalized, Re-clocked and Buffered.
-Dual Re-clocked Outputs.
-Broadcast professional 19"rack 1U Rack-mountable enclosure or Stand-alone portable unit .
-Singlemode link distance up to 120KM at 1.485Gbps.
-Multimode operation typically more than 1000 meters.
-Available with SC/PC SC/APC, ST/PC, ST APC, LC , or FC, optical connectors.
-Error free pathological pattern operation.

Example Aplication

Model Selection


The SDI video format supports:
625/25 PAL;
525/29.97 NTSC;
525/23.98 NTSC;
1080P 23.98/24/30/50/60;
1080i 23/24/30/50/59.94;
Connection Ports
Copper BNC
Transmission distance 550m-120Km( depend of model)
Wavelength- 1310 nm /1550nm /1470nm/1490 nm/1510nm/1530nm/1550nm/1570nm/1590nm/1610nm (depends on model)
DWDM -special order only
1 HDSDI over fiber, 2 HDSDIto fiber, 4HDSIover fiber,8 HD/SDI SDI over fiber 16 HD-SDI over fiber
Video Specifications
Video interface - BNC
Video input/outpit impedance - 75Ω
Video input/out put voltage - Typical:1Vpp,Min 0.5Vpp, Max 1.5Vpp
Video Frequency - Max 3.2Gb/s
Differential gain (10%~90% APL) <1%
Differential phase (10%~90% APL) <0.7
Video SDI standard -270Mbps(SD-SDI), 1.485Gbps/M(HD-SDI)
SMPTE424M 3Gb/s serial interface(3G-SDI)
1U 19" rack

Go back to home page Previous page Back to top
Company : News : Solutions : Technology : Support : Clients : Contact Us