�Create Your Own Solution       1.     CL-4000, 1 or 4 HDSDI / HDMI to QAM inserter DVB-T /DVB-C or IP 2.     CL-3000, HD-SDI or SD-SDI to QAM inserter 3.     CL-2000, HD Component Video or VGA Video to QAM Inserter 4.     CL-12, 1 Video 2 or 4 or 8 Audio over fiber for up to 150Km Broadcast 5.     CL-12HD, 1 Video 2 Audio 1 ASI or 1 HD/SD -SDI to fiber 6.     CL-12SC, 1 Video 2 Audio 1 subcarrier (4.5Mhz) Audio over fiber 7.     CL-24, 2 channels Fiber Optic Video and 4 simplex audio Transmitter and Receiver 8.     CL-48, 4 Channel Video 8 Audio Fiber Optic Transmitter / Receiver up to 120Km 9.     CL-816, CL-816, 8 Baseband Video/16 Audio Fiberoptic Video Multiplexer 10.     CL-1632, 16 Baseband Video/32 Audio Fiberoptic Video Multiplexer 11.     CL-1250V, Fiberoptic Gigabit Ethernet Video/Audio Multiplexer 12.     CL-1250VHD, Gigabit Ethernet , Video/Audio ASI - SDI , HDTV fiber optic Multiplexer 13.     CL-10V, 10 Channel Video Fiberoptic Multiplexer 14.     CL-270, 1-16 DVB ASI video or SDI video Fiberoptic Transport 15.     CL-350, MPEG Transport Stream Converter 16.     CL-350S, MPEG Transport Stream Fiberoptic Converter 17.     CL-110, MPEG-2 Digital Video Decoder 18.     CL-220, MPEG-2 Digital Video Encoder 19.     CL- ASI2IP, bi-directional ASI over IP converter , IP over ASI converter 20.     CL-LBAND, L-Band 900-2100Mhz RF Transmitter/Receiver 21.     CL-5000VA, Video/Audio Card Module 22.     CL-5000DVB, DVB-ASI/SMTPE 310M Card Module 23.     CL-FOS, Automatic and Manual optical redundant failover switch 1×2, 2×1 or 2×2 24.     CL-DVI2IP, DVI or VGA over IP High Definition Encoder and Decoder 25.     CL-HDMI2IP, HDMI to IP High definition Encoder 26.     CL-HDMI-RF, HDMI true 1080p High definition wireless transmission 27.     CL-HD-ENC, HD Video / Audio - MPEG4 h.264 Encoder 28.     CL-12ASI2I, 12ASI to IP converter 29.     CL-12IP2AS, IP to up to 12 ASI converter 30.     CL-ASI2IP, ASI to IP and IP to ASI converter 31.     CL-870-T, 1310 or 1550nm Direct Modulated AGC Optical Transmitter 32.     CL-870-R-2, Optical CATV RF Reciever with Dual Internal Redundancy 33.     CL-RF-SW, 2×1 RF switch, with its high resolution to the RF monitor 34.     CL-ASIMUX, 8 x 1 DVB ASI Transport Stream Multiplexer 35.     CL-MPEG224, MPEG-2 to MPEG-4 Transcoder 36.     CL-MPEG422, MPEG-4 to MPEG-2 Transcoder 37.     CL-4100, HD/SD - SDI to ASI Real time Encoder Converter 38.     CL-4SD-ENC, (4 in 1) 4 channel Baseband Video/Audio MPEG-2 encoder with DVB ASI and IP output. 39.     CL-ASI2DS3, ASI over DS3 line Transport Uni-directional, Bi-derectional 40.     CL-HDSDI, Uncompressed HD-SDI, SD-SDI, ASI Video Audio Over Fiber CL-ASI-DA, 2, 4, 8, 16 ASI , SDI ,SMPTE310M Distribution Amplifier 42.     CL-HD-DEC, HD Video / Audio - MPEG4 h.264 Decoder 43.     CL-SD-ENC, IP and ASI TS Encoder with SD-SDI and Baseband Video / Audio input 44.     CL-ASI2E1, ASI to 4 E1 converter and 4 E1 to DVB-ASI 45.     CL2000S, VGA RGB Video to QAM Inserter with Built in Resolution Scaler �Model�� CL-ASI-DA� CL-ASI-DA, 2, 4, 8, 16 ASI , SDI ,SMPTE310M Distribution Amplifier It is fully MPEG2 MPEG4 DVB ASI compatible so it can be used in any application where ,SD-SDI standard SDI video or ASI signals are to be copied and distributed. Distribution amplifier is ideal for medium- to long-distance distribution of digital signals.The reclocking circuit greatly reduces jitter induced over long cable runs or from unstable sources of standard data rate signals. The reclocker can easily be disabled to pass SMPTE 310M and other non-standard data rate signals. Features Example Aplication Model Selection CL-ASI-DA-2 1x2 ASI , SDI ,SMPTE310M Distribution Amplifier CL-ASI-DA-4 1x4 ASI , SDI ,SMPTE310M Distribution Amplifier CL-ASI-DA-8 1x8 ASI , SDI ,SMPTE310M Distribution Amplifier CL-ASI-DA-16 1x16 ASI , SDI ,SMPTE310M DA Specifications Aplications Inputs SERIAL DIGITAL INPUT Quantity: x1 Signal type: DVB-ASI 270Mb/s SD Serial Digital (SMPTE 259M) 1.485Gb/s HD Serial Digital (SMPTE 274M or 296M) -optional Impedance: 75Ω Return loss: >15dB Maximum cable length: 984 ft (300m) for 270 Mb/s 328 ft (100m) for 1.485 Gb/s Outputs SERIAL DIGITAL OUTPUT Quantity: x2, x4, x8, x16 Signal type: SD/ASI Serial Digital (SMPTE 259M or SMPTE 274M or 296M), follows input Impedance: 75Ω Return loss: >15dB Standards - 2,4,8,16 outputs - Data rates from19.39 Mb/s to 270 Mb/s - Use with MPEG2 MPEG4 TS DVB-ASI, SMPTE259M : SD-SDI SMPTE 310M signals -Use with encoders, servers and other ASI compliant equipment -Signal presence detection -Local and remote monitoring     Company : News : Solutions : Technology : Support : Clients : Contact Us